nVent CADDY | Stanion

Refine Results

Search Within Brand

: Stocked Items Only
: Bar Hanger Clips (1)
Box Hangers (3)
Box Mounting Brackets (9)
Box Support Brackets (2)
Box Supports-Stabilizers (4)
Box to Stud Fasteners (1)
Box-Fixture to Beam Fasteners (2)
Cable Pulley Supports (1)
Cable Rings & Saddles (6)
Channel Nuts & Hardware (3)
: 1-1/2 in D (1)
1-1/2 in and 2-1/8 in D (2)
1-1/2 in and 2-1/8 in D, 4 in, 4-11/16 in (1)
1-1/2 in, 2-1/8 in D (1)
1-1/2 in, 2-1/8 in and 2-1/2 in D (2)
4 in, 4-11/16 in (4)
: Square (3)
: 14/2 to 12/3 AWG (2)
: 32.8 cu-in (2)
: Yellow (2)
: 1 in (6)
1 in, 1-1/4 in (1)
1 in, 3/4 in (5)
1-1/2 in (1)
1-1/2 in, 2 in (1)
1-1/4 in (3)
1/2 in (7)
1/2 in, 3/4 in (11)
2 in (1)
3/4 in (2)
: 1 in EMT Conduit (1)
1/2 in, 3/4 in EMT Conduit (3)
14/2 AWG, 12/2 AWG, 10/2 AWG, 14/3 AWG, 12/3 AWG, 10/3 AWG, 8/2 AWG, 6/2 AWG Cable (1)
3/8 in Flexible Conduit, 14/2 to 12/3 AWG Cable (1)
: CN (15)
DE (1)
TW (2)
US (157)
: 1.315 in (2)
5/16 in (1)
: 0.12 in Dia x 1.25 in L (1)
0.56 in OD (1)
1 in L x 3/4 in W x 1 in H (1)
1-1/4 in W (4)
1.4 in W x 0.91 in H (1)
1/2 in L (2)
10-3/8 in L x 4 in W x 4 in H (1)
100 ft L (1)
11/16 in H (2)
2 in D (1)
: Domestic (1)
: Black Oxide (2)
Caddy® Armor (66)
Caddy® Armor/Pre-Galvanized (11)
Caddy® Armor/Zinc Phosphate (4)
Electro-Galvanized (45)
Electro-Galvanized/Pre-Galvanized (1)
Hot Dipped Galvanized (1)
Plain (10)
Plain/Pre-Galvanized (3)
Plain/Zinc Plated (1)
: 0.06 to 0.1 in THK (5)
1/16 in THK (1)
1/16 to 1/4 in THK (2)
1/4 in (1)
1/8 to 1/2 in THK (2)
1/8 to 1/4 in (14)
1/8 to 1/4 in THK (3)
1/8 to 3/8 in THK (1)
3 to 5 mm THK (1)
3/16 to 9/32 in (1)
: 1/2 in (3)
1/8 to 1/4 in (3)
13/16 in (2)
3/4 in (1)
: Tapped (1)
: 3/4 in (1)
4-1/4 in (1)
: 65 lb (1)
: 1/4 in (3)
3/8 in (1)
: 1/2 in, 3/4 in (2)
: 8 in (1)
: Double Loop (1)
: 100 lb (6)
100 lb Static (2)
123 lb Static (1)
130 to 225 lb (1)
15 lb (3)
15 lb Ultimate Static (3)
15/25 lb (2)
15/50/100 lb (3)
160 lb (1)
160 lb Static (2)
: nVent (175)
: 304 Stainless Steel (1)
ABS (1)
Acrylonitrile Butadiene Styrene (1)
Cast Iron (1)
Mild Steel (2)
Plastic (1)
Polyamide/Spring Steel (2)
Polyethylene (2)
Polyethylene/Polypropylene/Steel (1)
Polyethylene/Steel (1)
: Surface (1)
: Bottom (4)
Ceiling/Deck (1)
Channel (9)
Floor (2)
Flush (4)
Panel/Stud (1)
Push-In (2)
Side (14)
Snap-On (1)
Stud (15)
: 1 (1)
2 (1)
: 19 (2)
: 0.1 to 0.63 in (1)
0.34 to 0.71 in (2)
0.45 to 0.6 in (1)
0.472 in (1)
0.551 to 0.709 in (2)
0.57 to 0.92 in (2)
0.591 to 0.709 in (1)
0.6 in (1)
0.601 to 0.9 in (1)
0.67 to 0.84 in (1)
: 1/2 x 3 in, 3/4 x 2 in, 1 x 1 in (1)
: 1-1/4 in Dia (2)
2 in Dia (3)
4 in Dia (1)
: 1/4 in (1)
: 1/4 in (3)
3/16 in, 1/4 in (3)
3/8 in (4)
: 122 Series (1)
122-TI/T (1)
123 (1)
123-M (3)
123-P (1)
300 (2)
All-in-One (2)
B18 (1)
B18-EM (1)
BC10 (2)
: #10 (1)
#12 (1)
1 in Dia (1)
1-5/16 in Dia (2)
15/16 in (2)
2 in Dia (8)
3/4 in Dia (4)
4 in Dia (2)
: 24 in (2)
: #8 (1)
0.11 in THK, 160 lb Static Load, 1/4 in Hole (1)
0.268 in, 0.551 in and 0.413 in Hole (1)
0.41 in Hole (1)
0.429 to 0.531 in OD (1)
0.551 to 0.709 in OD (1)
0.563 in Dia Screw (1)
0.6 sq-in Area (1)
0.709 to 1.181 in OD (2)
0.866 to 1.181 in OD (1)
: 11 to 18 in (1)
15-3/4 to 25 in (1)
16 in (1)
17 to 26 in (1)
: 1 in EMT Conduit (2)
1/2 in Rigid and 3/4 in EMT Conduit (1)
1/4 in Rod, 12 to 8 AWG Wire, Cable Support System and Plain/Threaded Rod to 3/8 in Flange (1)
1/4 in Rod, 12 to 8 AWG Wire, High Performance Cable Support System (1)
1/4-20 or 10-24 Threaded Bridle Ring, Standard Drive Ring and Unthreaded Bridle Ring (1)
12/3 AWG MC/AC Cable, EMT, Rigid, ENT, IMT and Aluminum Conduit (1)
12/3 to 8/2 AWG Isolated Ground Cable, 12/3 to 10/2 AWG Super Neutral Cable and 10/3 to 8/3 AWG MC/AC Cable (1)
14/2 to 10/3 AWG MC/AC Cable (1)
14/2 to 12/3 AWG MC/AC Cable (1)
14/2 to 12/3 AWG MC/AC Cable, EMT, Rigid, ENT, IMT and Aluminum Conduit (1)
: 4.8 in (1)
: 2-1/4 in (1)
: 1/4-20 (1)
3/8 in (2)
3/8-16 (1)
: 1-Piece (13)
6-Run Flexible (1)
Adjustable Far Side (1)
Adjustable Far Side Back Mount (1)
Adjustable T-Grid (1)
Bolt Close (2)
Cablecat (4)
Colorado Jim Non-Metallic (1)
Combination Snap Closed (2)
Fixed (1)
: 2.3 in (1)
3/4 in (1)
6 in (1)
: 10/3 to 6/3 AWG, 12 to 8 AWG (1)
12 to 8 AWG (1)
14/2 to 12/3 AWG (3)
14/4 to 10/3 AWG (1)
14/4 to 10/3 AWG, 12 to 8 AWG (1)
8 AWG, 9 AWG (1)
8 AWG, 9 AWG, 10 AWG, 12 AWG (2)