Factory Availability
Product Overview
The EID disconnect switch provides an explosion proof disconnect with overload and circuit protection for hazardous area electrical systems. This disconnect solution incorporates EATON's Crouse-Hinds high integrity manufacturing standards for safety and reliability in a compact, space efficient NEMA 4X enclosure.
- Attributes
- Documents
- Application
- Item Features
- Standards
BrandCrouse-Hinds
Actuator TypeRotary Handle
Amperage Rating400 A
Country of OriginFR
Dimensions41.22 in L x 17.19 in W x 13.49 in H
Enclosure TypeNEMA 3/3R/4/7/9
FinishNatural
Horsepower125 hp at 240 VAC, 250 hp at 480 VAC, 350 hp at 600 VAC, 30 hp at 250 VDC
Manufacturer NameEaton
MaterialCopper-Free Aluminum
SeriesEID
TypeExplosionproof Fused
Voltage Rating240 to 600 VAC/250 VDC
Industry Facilities, Factories, Power Distribution and Control, Hazardous Environments Applications
- Allows for field installation of switch while maintaining product certification
- NEMA 4X breather and drain provides a moisture control solution in hose down applications
- Small, compact footprint less mounting space required
- Large red painted aluminum rotary handle operator mounted on cover assembly provides rugged, reliable performance in the field and allows for the position of the switch to be easily identified from a distance
- Internal fused switches are rated up to 200 kA short circuit rating at 600 VAC, providing increased protection
- Neoprene cover gasket provides NEMA 4 ingress protection
- Detachable/adjustable mounting feet provide flexible mounting alternatives for ease of installation, no need to replace the entire enclosure if a mounting foot is broken
- Stainless steel hinges easy internal access for wiring and maintenance
- (2) 1/2 in NPT conduit entries, one on top and one on bottom for field addition of breather and/or drain or for use with auxiliary contacts, holes come plugged with EATON Crouse-Hinds PLG explosion proof plug as standard
- Provides lockout/tagout capability which complies with OSHA requirements, allowing for locking in the ON or OFF position for standard maintenance checks
- Complies with National Electric Code® article 312 wire bending requirements for maximum wire gauge allows for easy and safe installation and reliable operation of the product
Class I, Div 1 and 2, Groups B, C, D, Class I, Zones 1 and 2, Class II, Div 1, Groups E, F, G, Class III|UL 1203|cUL Listed|CSA C22.2 No. 30|NEC Compliant|CEC Certified