Factory Availability
Product Overview
EDS factory sealed snap switches or manual motor starting switches do not need external sealing. The switches are enclosed in a unique sealing well with double flanges which mate with the cover and the body. Small, compact enclosures have accurately ground wide flanges on body, cover and sealing well for flame-tight joints. Wiring pigtails are factory sealed from under-the sealing well. Reliable pouring of seals at the factory ensures safe sealing.
- Attributes
- Documents
- Application
- Item Features
- Standards
BrandCrouse-Hinds
Country of OriginUS
Dimensions5-7/8 in L x 3-1/2 in W x 3-1/16 in H
FinishElectro-Galvanized/Aluminum Acrylic Painted
Manufacturer NameEaton
MaterialFeraloy® Iron Alloy
NEMA Rating3/7B/7C/7D/9E/9F/9G
Operator TypeFront
SeriesEDS
Type1-Gang Factory Sealed Heavy Duty Through-Feed
Voltage Rating600 VAC
Industrial Facilities and Factories, Facility, Power Distribution and Control, Industrial Facilities and Factories Facility, Power Distribution and Control Application Applications
- Factory sealed enclosures are used to prevent arcing of enclosed device from causing ignition of a hazardous atmosphere external to the enclosure, in conjunction with magnetic starters or contactors for remote control of motors
- Reduce installation problem
- Eliminate external seals
- Lower installation cost
- Improve safety
- Are used with general purpose snap and pushbutton type switches
- Standard neoprene covers for front operated pushbuttons prevents accumulation of dirt and entrance of water around operating shafts
- Mounting lugs and taper tapped hubs with integral bushing
- Large machine screws for fastening covers to bodies
- Lockout provisions on front operated pushbutton (marked "STOP" and "OFF") and selector switch covers
- Lockout hole for padlock having 1/4 in hasp is provided when used with covers for front lever and side rocker type operation
- Close tolerances in machining of wide, mating flanges and journaled shafts and bearings for front button operation, produces flame tightness of enclosure joints
- On enclosures with front lever and side rocker type operating handles, threaded type shafts and bushings are used to ensure flame tightness
- When stop is indicated, button is automatically red, when start is indicated, button is automatically green, otherwise, black buttons are standard
- Explosionproof, dust ignitionproof, raintight
- 1 in hub
- Two circuit universal
- Fully assembled
- For use with EDS/EFS series control stations
Class I, Division 1/2, Group B/C/D, Class II, Division 1, Group E/F/G, Class II, Division 2, Group F/G, Class III|CSA Certified|UL Listed|CSA C22.2|UL 1203