Factory Availability
Product Overview
Crouse-Hinds series Champ® FMVA LED floodlights are designed to provide full-spectrum, crisp, white light in class I and class II hazardous areas. Eleven versions of the Champ® FMVA are available, ranging from 3000 to 50000 Lumens, providing a reliable and long-life solution for a wide range of floodlighting applications. Champ® FMVA LED floodlights are certified for use in NEC, CEC and IEC hazardous locations, providing a single solution for applications around the world. These floodlights are ideal for outdoor wall and stanchion mounted general area lighting, where flammable vapors, gases, ignitable dusts, fibers or flying's are present.
- Attributes
- Documents
- Application
- Item Features
- Standards
BrandCrouse-Hinds
Amperage Rating1.12 to 0.4 A
Average Life60000 hr
Color Rendering Index (CRI)70
Color Temperature5000 K
Country of OriginUS
Dimensions15.5 in W x 7 in D x 12 in H
Enclosure TypeNEMA 4X/IP66
Fixture Wattage107 to 113 W
Housing FinishEpoxy Powder Coated
Housing MaterialDie Cast Aluminum
Lamp TypeLED
Lamp Wattage500 W
Lens TypeClear Glass
Light ColorCool White
Light Output140 Lumens/W
Lumens15183 Lumens
Manufacturer NameEaton
Mounting TypeYoke
SeriesFMVA
Voltage Rating100 to 277 VAC/127 to 250 VDC VAC/VDC
Oil, Gas Refineries, Drilling Rigs, Petrochemical Facilities, Food, Beverage Facilities, Platforms, Loading Docks, Tunnels, Indoor, Outdoor Spotlighting, Outdoor Wall and Stanchion Mounted General Area Lighting
- Globally certified for use in classified, hazardous areas
- Eleven models from 3000 to 50000 Lumens for a wide range of floodlighting applications
- Provides up to 60000 hr rated life at 55 deg C eliminates need for frequent lamp replacement
- Die cast aluminum heat sink increases surface areas and improves airflow, optimizing both LED and driver life
- Energy efficient technology up to 72% energy savings over HID fixtures
- Minimum T3C temperature rating safely operate in the most hazardous environments and any non-hazardous location
- Shock and vibration resistant solid state luminaires have no filaments or glass components that could break greatly reduces the risk of premature failure
- Easy installation yoke design to mount to existing Crouse-Hinds series SFA6 slipfitter and SWB6 wall mount
- Instant illumination and restrike
- Cold temperature operation/no warm-up required
- Serviceable drivers
- Contains no mercury or other hazardous substances
- 7 x 6 floodlight pattern optical distribution
Class I, Division 2, Groups A, B, C, D|Class I, Zone 2|Class II, Groups E, F, G|Class III|CSA C22.2 No. 137|CEC Certified|CE 0539|DEMKO 15 ATEX 1377X|DEMKO 15 ATEX 1383|IEC 60079-0, 6th Edition (2011-06) + Corr. 1 (2012-01) + Corr. 2(2013-12) + I-SH 01 (2013-11) + I-SH 02 (2014-10)/EN 60079-0:2012 + A11:2013|IEC 60079-7, Edition 5.1 (2017-08)/EN 60079-7: 2015 +A1:2018|IEC 60079-31, 2nd Edition (2013-11)/EN 60079-31:2014|IEC 60598-1:2008/EN60598-1:2008|IEC 60598-2:2008/EN60598-2:2008|IECEx UL15.0029X|NEC Certified|UL 844/1598/1598A/8750