Factory Availability
Product Overview
Crouse-Hinds series Arktite EBBR interlocked receptacles are used as a service outlet for portable equipment in damp, wet, corrosive locations. Applicable in areas which are hazardous due to flammable vapors, gases or combustible dust (e.g. refineries and chemical plants), and in locations where frequent wash downs are necessary or where heavy rain or water spray is prevalent.
- Attributes
- Documents
- Application
- Item Features
- Standards
BrandCrouse-Hinds
Amperage Rating50 A
ColorNatural
Country of OriginUS
Dimensions24.7 in L x 14.06 W x 10.25 in D
Manufacturer NameEaton
MaterialCopper-Free Aluminum
NEMA RatingNEMA 3/3R/12/7BCD/9FG
Number of Poles3
Number of Wires3
SeriesEBBR
TypeDust-Ignitionproof Grounding Style 2 Explosionproof Raintight
Voltage Rating480 VAC
For non-hazardous areas, industrial facilities, factories facility, power distribution and control applications
- Rugged, corrosion-resistant, cast copper-free aluminum construction
- Accepts compatible ArktiteĀ® plug of same rating and configuration
- Mechanical interlock mechanism for dead front construction
- Receptacles are mechanically interlocked with circuit breakers to provide disconnect means, short circuit protection and thermal time delay overload protection
- A spring door receptacle, located at the bottom of the unit, is mechanically interlocked with the circuit breaker operating mechanism for safe and dependable operation
- Plug and receptacle contacts cannot be made or broken under load
- The circuit breaker cannot be closed until the plug is fully inserted and the plug cannot be withdrawn unless the breaker is de-energized
- Operating handles can be padlocked in either ON or OFF positions
- Breakers are trip-free of the handles and will open under short circuit or overload even if the handle is locked in the ON position
- Component operating handles located through the right side wall of the body permits visual confirmation of correct component assembly and operation
- Semi-clamshell enclosure design, with an external machined flat joint flame path between body and cover makes interior components easily accessible
- Minimum enclosure to enclosure spacing with little interference between the opened cover and an adjacent enclosure
- Copper-free aluminum hinges allow the cover to swing well out of the way
- Stainless steel, quick release, captive, hex head cover bolts
- Stainless steel springs provide clear indication cover bolts are fully retracted from body
- Versatile, internal operating mechanisms allow for field adjustment to accommodate popular manufacturer's breakers
- Simple, straightforward installation of breaker on pre-drilled mounting plate within enclosure
- Neoprene cover gasket permanently attached to the cover seals out moisture
- Tap-on mounting feet
- Without circuit breaker
NEC Certified|UL Listed