C-H S611D242N3S RVSS3-PHASE120V CTL242 F
Factory Availability
C-H S611D242N3S RVSS3-PHASE120V CTL242 F
Factory Availability
Stanion #S611D242N3SCH
MFG #S611D242N3S
UPC #786685480367
Product Overview
EATON revolutionized the reduced voltage control marketplace with its advanced feature set and user friendly user interface module to enhance system performance and reduce commissioning times. TheS611 adds enhanced functionality with network communications, metering, monitoring and diagnostics capabilities. The EATON line of S611 reduced voltage soft starters is multi-functional, easy to install and easy to program. Designed to control the acceleration and deceleration of 3-phase motors up to 600 V, the line is available from 26 A through 414 A. The S611 is designed to be a complete package combining the SCRs, bypass contactor and overload in 1-unit.
- Attributes
- Documents
- Application
- Item Features
- Standards
BrandEATON
ActionStart/Stop
Amperage Rating242 A
Coil Voltage120 VAC
Connection TypeLug
Country of OriginDO
Dimensions8.37 in L x 11.58 in W x 20.83 in H
Frequency Rating47 to 63 Hz
Full Load Current120 to 242 A
Manufacturer NameEaton
Motor Power250 hp
Number of Poles3
Operating Temperature-20 to 50 deg C
Overload RelaySolid-State
Phase3
SeriesS611
Setting50 to 100%
Starting ModesSoft Start/Current Limit/Kick Start/Ramp Start/Soft Stop
Timing0.5 to 180 s
TypeNon-Combination Reduced Voltage Standard
Voltage Rating480 VAC
Electrical Assemblies, Panels and EOEMs Applications
- The user interface module (UI) provides an intuitive, easy to use human interface with powerful configuration capabilities to maximize system performance
- Door or device mounted UI enables users to safely configure, commission, monitor and troubleshoot the system at the electrical panel without opening the enclosure door, eliminating the possibility of an arc flash incident
- System operating parameters can be monitored enterprise wide through a communications network, increase uptime by providing data for process management and preventive diagnostics
- Run bypass mode greatly reduces internal heating created by the greater power dissipation in the SCRs, bypass contactors directly connect the motor to the line and improves system efficiency by reducing internal power losses
- Internal solid state overload protection provides accurate current measurement and trip settings, sophisticated algorithms solve a series of differential equations that model true motor heating and cooling, resulting in superior motor overload protection while minimizing nuisance trips
- Advanced selectable protective features safeguard the motor and system against a variety of system faults
- Internal run bypass contactors and overload protection eliminate the need for additional devices, reducing enclosure sizes minimizing installation and wiring time and reducing overall assembly size and cost
- Wide range of overload FLA settings (50 to 100% of rated frame current) and a selectable trip class (5 to 30) offers users the flexibility to fine tune the starter to match specific application requirements
- Variable ramp times and torque control settings provide unlimited starting configurations, allowing for maximum application flexibility
- Kick start feature enables soft starting of high friction loads
- Soft stop control for applications where an abrupt stop of the load is not acceptable
- Six SCRs control all three motor phases, providing smooth acceleration and deceleration performance
- Soft acceleration and deceleration reduces wear on belts, gears, chains, clutches, shafts and bearings
- Reduce the peak inrush current stress on the power system
- Minimize peak starting torque to diminish mechanical system wear and damage
- 120 VAC control voltage enhances ease of connections
- The S611 lends itself to serviceability, the printed circuit boards (PCBs) and contactors can be replaced in the field
- The S611 has built-in communication capabilities through two communications ports to connect the soft starter to a variety of networks, including Modbus® (resident), DeviceNet, PROFIBUS and Ethernet
- 75 hp at 208 V, 75 hp at 240 V, 200 hp at 480 V, 250 hp at 600 V
- http://videos.eaton.com/detail/video/3753115692001/soft-starter-ds7-up-to-32-a?autoStart=true&q=DS7
CSA C22.2 No. 235|CSA No. 3211-06|IEC 60947-4-2|UL 1077