C-H 5043PMURF FIXED CAP 50KVAR 480V 3PH W/LTS &
Factory Availability
C-H 5043PMURF FIXED CAP 50KVAR 480V 3PH W/LTS &
Factory Availability
Stanion #5043PMURFCH
MFG #5043PMURF
UPC #782116058808
Product Overview
Unipak's are capacitor-based products designed to be used when fixed, static capacitance (wall or floor mounted) is need within parts of your electrical system. With optional replaceable fusing, indicator lighting to visually indicate cleared fusing, and/or air filters for use in dusty environments.
- Attributes
- Documents
- Application
- Item Features
- Standards
BrandEATON
Amperage Rating60 A
Connection TypePower/Ground Terminal Lug
Country of OriginUS
Dimensions11.054 in L x 10.1 in W x 25.3 in H
Enclosure TypeNEMA 1/12/3R
Environmental Conditions-40 to 115 deg F Operating Temperature, -40 to 131 deg F Storage Temperature
Frequency Rating60 Hz
Fuse Amperage Rating150 A
Indicator TypeCleared Fuse Indicating Red Neon Light
Manufacturer NameEaton
Material14 ga Steel
Mounting TypeFloor/Wall
Power Rating50 kVA
Type3-Phase Fixed Low Voltage Metallized Polypropylene Standard Duty Round
Voltage Rating480 VAC
For power factor correction in plants experiencing harmonics problems due to high amounts of non-linear loads and indoor/outdoor applications
- Removable lift bolts standard cabinet
- Power line interconnect
- Modular tray design
- Blade type fuses mounted on insulator stand-offs
- LED located door mounted and neon at individual fuses to facilitate tracing of cleared fuses
- Push-to-test allows testing of door mounted LED cleared fuse indicating lights
- Auto locate when door is open and bus is energized, fuse circuit automatically checks for cleared fuses, if a fuse has cleared, the light at the fuse turns on for easy troubleshooting
- Door interlock automatically turns off control circuit when engaged
- Power continues to be provided to the unit until disconnect is open
- Two side louver fans per cabinet provide cooling and reduce operator exposure to discharge
- Replaceable dust filtering provided, dust filters can be replaced without opening cabinet
- Ease of expansion capacitor stage nests are self-contained and can be added in the field
- Two bolts mount the nest in the field, control wire plugs connect to factory standard wire harness on the left side of the cabinet
- Ease of replacement cells can be easily replaced individually by removing the mounting bolt and lifting out of the nest without removal of any other components
- Built-in thermal sensing, alarming and protection feature allows the unit to operate in optimal temperature while alerting the user of ambient temperature exceeding the nominal operating range
BAA Compliant|CSA C22.2 File No 190|UL 810