HNYWL BZ-2RW8299-A2 LIMIT SWITCH
Product Overview
MICRO SWITCH BZ/BA/BM/BE Series premium, large snap-action switches offer precision operation and sensitive differential travel. These Series meet various international agency requirements, and are often used for precision on/off applications, as well as end of limit, presence/absence, and manual operator interface functions. Configured options with BZ, BA, BM, and BE switches provide a wide variety of operating and interface characteristics.
- Attributes
- Documents
- Application
- Item Features
- Standards
BrandHoneywell
Actuating Force0.97 N
ActuatorRigid Roller Lever
Actuator Length48.22 mm
Contact ConfigurationSPDT
Dimensions2 in L x 0.7 in W x 1 in H
Electrical Ratings15 A at 125 VAC, 186.42 VA
Environmental Conditions1.5 mm Peak-to-Peak Amplitude, Frequency 10 to 55 Hz, 2 Continuous hr
Frequency Rating50/60 Hz
Manufacturer NameHoneywell
MaterialPhenolic
MountingThreaded
Number of Poles1
Operating Cycles20000000
SeriesBZ Series
Terminal TypeScrew
TypeLarge Premium Standard
Other
Irrigation Systems, Semi-Trailer Trucks, Timing Devices, Office Equipment, Test Instruments, Medical/Dental Equipment, HVAC Equipment and Manually Operated Devices
- The switch's elongated mounting hole allows for easier, more accurate mounting
- Used in applications where very tight and sensitive control is required between the operate and release points
- -55 to 85 deg C operating temperature
- 2000 V between each terminal and ground dielectric strength, premium large basics SPDT
- 0.5 mm nominal break distance (minimum distance between separated mating contacts in fully open position)
- Silver contacts
- 2.16 mm over travel, 0.21 N release force
- 0.1 to 100 mm differential travel
- 0.33 Nm tightening torque, 25.4 mm mounting centers
- Long mechanical life up to 20,000,000 cycles at 95% survival
- Moving contact rivet construction
- Choice of actuation, termination and operating characteristics
- Accepted world-wide standard "Large Basic" switch
- Low operating force and differential travel
- Bottom facing NO 8 screws and cup washers terminal, recommended for adjustable operating point, roller lever 26.7 mm
- Plastic material
- 15 A, 125/250/480 VAC, 1/8 hp at 125 VAC, 1/4 hp at 250 VAC, 1/2 A at 125 VDC, 1/4 A at 250 VDC electrical rating
UL E12252 Listed|CSA LR41370 Certified|ENEC|CE Marked