BROAN A80 INVENT SERIES 80 CFM VENTILATION FAN 2
Product Overview
NuTone® Bath Ventilation Fan, Single Speed, Series: InVent™, 80 cfm Flow Rate, 4 in Diameter Duct, 120 VAC, 0.37 A Current/Amps, 60 Hz Frequency, 43.1 W Wattage Consumption, 2 sones, 11-3/8 in Grille Length, 12 in Grille Width, Polymer Grille, 9-1/4 in Housing Length, 10 in Housing Width, 5-3/4 in Housing Height, Galvanized Steel Housing Material, Ceiling/Room-Side Mounting, No Humidity Sensing, No Motion Sensing, White,
- Attributes
- Includes
- Item Features
- Standards
BrandNuTone®
ColorWhite
Current/Amps0.37 A
Duct Diameter4 in
Flow Rate80 cfm
Frequency Rating60 Hz
Grille Length11-3/8 in
Grille MaterialPolymer
Grille Width12 in
Housing Height5-3/4 in
Housing Length9-1/4 in
Housing MaterialGalvanized Steel
Housing Width10 in
Humidity SensingNo
Manufacturer NameBroan-NuTone
Motion SensingNo
Mounting TypeCeiling/Room-Side
SeriesInVent™
Sones2 sones
TypeSingle Speed
Voltage Rating120 VAC
Wattage Consumption43.1 W
Damper/Duct Connector
- 80 CFM reduces humidity to quickly eliminate fogged mirrors and manage moisture in bathrooms up to 75 sq-ft, so your vision will always be clear and your surroundings will always be comfortable
- Retrofit installations can be done entirely from the room side no attic access required, this means a faster, easier installation, so you can move on to something else
- With our TrueSeal™ damper technology, InVent™ fans reduce air leakage by up to 50% compared to competitive models, resulting in better home performance via blower door tests and reducing cold and warm air backdrafts
- EzDuct™ connector can be installed room-side with no attic access required, fan housing connection have never been easier
- UL Listed for use over tubs and showers with a GFCI circuit, so you can capture the steam before it spreads throughout the room by locating your fan exactly where you need it the most
- Plug-in, permanently lubricated motor engineered for continuous operation
- Dynamically balanced centrifugal bowler wheel for quite efficient performance
- Low RPM for quiet operation
- Polymeric, 4 in duct connector with tapered sleeve and no metallic clatter
- 5-3/4 in height allows for 2 x 6 in ceiling installations
- Sturdy, easy, four-point mounting directly to joist
- Can be mounted in ceilings up to 7/12 pitch
- Horizontal duct direction
- 80 CFM at 0.1 in/67 CFM at 0.25 in flow rate
- https://www.youtube.com/watch?v=DBih_0olkAU&feature=youtu.be
UL Listed|HVI Certified