O-Z/Gedney | OZ-G EYAM150 1-1/2-IN HOR/VERT SEALING FTG

BrandO-Z/Gedney

Country of OriginMX

Dimensions2 in Dia x 6-3/4 in L

FinishElectroplated Zinc

Manufacturer NameEmerson Electric

MaterialMalleable Iron

Size1-1/2 in

Suitable For Use WithIMC/Rigid Metal Conduit

TypeType EYAM Dust-Ignitionproof Explosionproof Raintight Horizontal Vertical

Other

Removable Close Nipple

To seal conduits in vertical or horizontal runs
To minimize the passage of gases and vapors and prevent the passage of flames from one portion of the electrical system to another through the conduit
25% conductor fill
Use with type EYC sealing compound and type EYF fiber
Prevent passage of gases, vapors or flames from one portion of conduit system to another
Restrict any explosion to the sealed off enclosure
Prevent pressure piling within conduit system
Required in class I, division 1 and 2 locations within 18 in of enclosures containing apparatus that may cause arcs, sparks or high temperatures
Required in class I, division 1 and 2 locations where 2 in or larger conduit enters enclosure, fitting housing terminals, splices or taps
Required in class I, division 1 and 2 locations at the boundary where conduit leaves classified location
Required in class I, division 1 and 2 locations where two or more enclosures are connected by 36 in or less conduit, seal must be located within 18 in of either enclosure
Required where cables (which exceed rate of gas or vapor transmission permitted for seals) are used in class I, division 2 locations
Smooth, rounded integral bushing in each hub to protect conductor insulation
Accurately tapped, tapered threads for tight, rigid joints and ground continuity
Removable nipple in male sealing fitting may be used interchangeably in top or bottom hub
Large opening for damming and filling

Limited