ABB DS4516MRAB0 400A NLT 4P5W MG 516 AB0 3PY120V
ABB DS4516MRAB0 400A NLT 4P5W MG 516 AB0 3PY120V
Stanion #DS4516MRAB0ABB
MFG #DS4516MRAB0
UPC #708917149118
Product Overview
Russellstoll® Max-Gard® Male Inlet, 3-Phase Standard Waterproof, 120/208Y VAC, 400 A, 60 Hz Frequency, 4 Pole, 5 Wires, NEMA 4X/6, Industrial Grade, -40 to 130 deg C, Pressure-Type Solderless Screw Terminal, Copper-Free Cast Aluminum, 9-1/4 in H Dimensions,
- Attributes
- Documents
- Application
- Item Features
- Standards
BrandRussellstoll®
Amperage Rating400 A
Country of OriginUS
Dimensions9-1/4 in H
Frequency Rating60 Hz
GradeIndustrial
Manufacturer NameABB
MaterialCopper-Free Cast Aluminum
NEMA RatingNEMA 4X/6
Number of Poles4
Number of Wires5
Temperature Rating-40 to 130 deg C
Terminal TypePressure-Type Solderless Screw
Type3-Phase Standard Waterproof
Voltage Rating120/208Y VAC
For shore power to marine vessels sightseeing boats
- With angle adapter, junction box
- Waterproof construction provides environmental separation at the front of each device (they dont have to be connected together just to be called "watertight")
- All receptacles and connectors must have a rotating disk on the face of the interior, which provides live contact isolation and environmental separation
- All devices upon disconnect under load shall have provision so the arc is contained and extinguished within the insulation cavity, making it impossible to withdraw a live plug
- Watertight capability shall be obtained by using a gasketed screw cap
- All devices shall be factory polarized for amperage, voltage, frequency and phase, thus providing a single voltage rating, single interface system
- The grounding of the device shall be accomplished through a separate center ground (earth) make first and break last pole on all devices for complete system grounding
- All devices shall accommodate up to four power pins plus a separate center ground pin and they shall be integral with the connector bodies
UL 1010/231/1682/1686 File No. E2630/E57324/E68085/E123752|CSA C22.2 182.1 File No. LR14096|MIL-STD-105|ASTM D570/D2565|OSHA Compliant