SUPERIOR 09-097-02 25 X 24 SEALPIC-FSF
Product Overview
SEALPIC®-FSF cables are designed for low risk direct burial or duct applications where protection from moisture is required and aluminum shielding is desired. SEALPIC-FSF may be used aerially, but must be attached to a support strand.
- Attributes
- Documents
- Application
- Item Features
- Standards
BrandSUPERIOR ESSEX®
Conductor Size24 AWG
Conductor TypeAnnealed Solid Copper
Insulation MaterialPolyolefin
Jacket ColorBlack
Jacket MaterialPolyethylene
Length5000 ft
Manufacturer NameSuperior Essex
Number of Conductors25 Pairs
Outside Diameter0.52 in
TypeRDUP PE-89
Voltage Rating300 VAC
Low Risk Direct Burial, Underground Conduit and Lashed Aerial
- Twisted into pairs with varying lay lengths
- Non-hygroscopic, dielectric tape applied over the core wrap
- Fully flooded shield interfaces
- Inhibits corrosion and water migration
- Provides a tough, protective covering designed to withstand exposure to direct sunlight, atmospheric temperature changes and stresses expected in standard installations
- Individual insulated conductors, twisted into pairs with varying lay lengths, specific color combinations provide pair identification
- 80 deg C ETPR compound, completely filling the interstices between the pairs and under the core wrap
- Corrugated, copolymer coated, 8 mil aluminum tape applied longitudinally with an overlap; flooded shield interfaces
- 5.6 (18.4) maximum average attenuation 772 kHz at 68 deg F (20 deg C) dB/kft (dB/km)
- 144 (89.5) maximum conductor resistance @ 68 deg F (20 deg C) Ohm/sheath mile (km)
- 1.5 to 5% DC resistance unbalance
- 3000 V conductor to conductor, 10000 V conductor to shield dielectric strength DC potential
ANSI/ICEA S-84-608-2011 Specified|RDUP 7 CFR 1755.890 (PE-89)|RoHS Compliant