WATT-STOPPER DSW-302-W D UAL TECH WALL SWITCH OCCUPANCY SENSOR 120/277V W
WATT-STOPPER DSW-302-W D UAL TECH WALL SWITCH OCCUPANCY SENSOR 120/277V W
Stanion #DSW302WWAT
MFG #DSW-302-W
UPC #7.54183E+11
Product Overview
The DSW-302 dual technology wall switch sensor turns lights off and on based on occupancy and contains two relays for controlling two independent lighting loads or circuits. It combines the benefits of passive infrared (PIR) and ultrasonic detection technologies for high sensitivity to small and large movements. The DSW-302 replaces existing wall switches and fits behind a standard decorator wallplate .
- Attributes
- Documents
- Application
- Item Features
- Standards
BrandWattStopper®
ColorWhite
Connection TypeFlying Lead
Control OutputAutomatic On/Off, Manual On/Off
Country of OriginCN
Coverage1050 sq-ft
Dimensions2.73 in L x 1.75 in W x 1.81 in H
Lamp TypeLED
Manufacturer NameLegrand
MaterialPlastic
Mounting TypeSurface/Strap
Power Rating0 to 1200 W
Sensor TypePassive Infrared/Ultrasonic
SeriesDSW
Temperature Rating35 deg C
Time Delay5 to 30 min
TypeDual Technology Dual Relay
Viewing Angle180 deg
Voltage Rating120/277 VAC
Other
Indoor, Commercial, Small/Executive Offices, Small/Medium Conference Rooms and Lunch/Break Rooms Applications
- Complies with 2011 NEC requirements
- Zero crossing on both relays for long relay life
- Vandal-resistant lens combines precise coverage with durability
- Selectable walk through mode turns lights off 3 min after the room is initially occupied if no motion is detected after the first 30 s
- Test mode allows quick and easy adjustments
- Selectable audible alert for impending shutoff
- In automatic mode, sensor returns automatically to auto-ON after lights are turned OFF manually, ideal for presentations
- Four occupancy logic options to customize control to meet application needs
- Optional light level sensing with simple setup
- Service mode allows sensor to operate as a service switch in the unlikely event of a failure
- Sensor coverage tested to NEMA guide publication WD 7-2000
- 1000 W tungsten, ballast, E-ballast, LED, 1/4 hp load limit for relay 1 at 120 VAC, 1200 W ballast, E-ballast, LED, 1/4 hp load limit for relay 1 at 277 VAC, 800 W tungsten, ballast, E-ballast, LED, 1/6 hp load limit for relay 2 at 120 VAC, 1200 W ballast, E-ballast, LED, 1/6 hp load limit for relay 2 at 277 VAC
- Turns lights on and off based on occupancy
- Replaces existing wall switches and fits behind a standard decorator wallplate
- Color-matched lens and low profile for appealing design
- Defaults to Manual-ON operation for maximum energy savings
- Retrieving data
- Wait a few seconds and try to cut or copy again
- High sensitivity and dense coverage for exceptional performance
- Two relays for control of two separate lighting loads or circuits
RoHS Compliant|cUL Listed|UL 244A|UL 508