EATON
C-H 15RBA4-150E FUSE RBA 400 15KV 150E
Factory Availability
EATON
C-H 15RBA4-150E FUSE RBA 400 15KV 150E
Factory Availability
Stanion #15RBA4150ECH
MFG #15RBA4-150E
UPC #786670233213
Product Overview
Westinghouse electric company introduced the redesigned and improved RBA (indoor with exhaust control device filter or condenser) and RDB (vented outdoor dropout) ranges of boric acid DE-IONĀ® fuses to replace the BA range of fuses Eaton RBA (refillable boric acid) and RDB (refillable dropout boric acid) power fuses are expulsion type power fuses designed for indoor or weatherproof enclosure (RBA) or outdoor vented (RDB) applications. RBA/RDB fuses are renewable (refillable) as the descriptions above state. The whole fuse unit is not discarded after a fault interruption. Usually, only 1-piece of the fuse, the refill unit, needs to be replaced after an interruption and for this reason, RBA/RDB fuses provide an economical approach to the protection of power circuits rated up to a maximum of 38 kV. They are especially well-suited for large industrial load fusing needs.
- Attributes
- Documents
- Application
- Item Features
- Standards
BrandEATON
Amperage Rating150E
Country of OriginDO
Dimensions8.88 in L x 2.2 in W x 2.2 in H
Manufacturer NameEaton
MaterialGlass Epoxy
SpecificationsClass E, 16 kV Maximum Voltage
TypeType RBA4 Single Barrel Standard Speed
Voltage Rating14 kV
Load Interrupter Switchgear, Power Transformers, High Voltage Capacitors, Circuit Protection and Pad Mounted Transformer Applications
- A replaceable refill unit, comprising the current responsive element and the arc de-ionizing and extinguishing boric acid sold filler material
- All contained within a high strength glass epoxy tube and with end connections for interfacing with the fuse holder
- The fuse holder comprises a high strength glass epoxy tube and cast high conductivity end connections
- The fuse holder assembly also includes the spring and shunt assembly which is pre-loaded when a fuse holder is charged with a refill unit
- A reusable mounting to interface the loaded fuse holder assembly into the protected circuit
- The mounting comprises the live parts, a pair of assembles that interface with and securely support the fuse holder
- A non-disconnect mounting permanently mounts the fuse holder containing the refill with tension type fuse clips or bolted connections until it is completely removed
- The disconnect mounting permits a fuse to be opened, closed or even lifted out of the mounting once it is opened
- An insulated stick with a hook on the end of it is used to perform the opening and closing functions in a disconnect mounting
- The insulated stick is referred to as a switch stick
IEEE C37.41