NSI
TORK 2117 PHOTOCONTROL 1/2-IN CONDUIT MOUNTING
NSI
TORK 2117 PHOTOCONTROL 1/2-IN CONDUIT MOUNTING
Stanion #2117TOR
MFG #2117
UPC #786261600370
Product Overview
NSI TorkĀ® Photocontrol, Series: 2110, 120 VAC, 50/60 Hz, 3000 W Tungsten, 3000 VA Ballast, SPST, 2 min, 16 AWG Wire, Cadmium Sulfide Cell Sensor, 1 to 5 FC (ON)/3 to 15 FC (OFF) Ratio, Environmental Conditions: -40 to 140 deg F Operating Temperature, Stem/Surface Mount, Die Cast Aluminum, 3-3/4 in L x 2 in W x 1-1/2 in H,
- Attributes
- Documents
- Application
- Includes
- Item Features
- Standards
- Warranty
BrandNSI
Ballast Load3000 VA
Contact FormSPST
Country of OriginCN
Dimensions3-3/4 in L x 2 in W x 1-1/2 in H
Environmental Conditions-40 to 140 deg F Operating Temperature
Frequency Rating50/60 Hz
Manufacturer NameNSi Industries
MaterialDie Cast Aluminum
Mounting TypeStem/Surface
Sensitivity1 to 5 FC (ON)/3 to 15 FC (OFF) Ratio
Sensor TypeCadmium Sulfide Cell
Series2110
Timing Range2 min
Tungsten Rating3000 W
Voltage Rating120 VAC
Wire Size16 AWG
Parking Lot Lighting, Building Perimeter Lighting and Outdoor Signage Applications
1/2 in Conduit
- Conformal coated cadmium sulphide photocell resists effects of moisture and airborne contaminants, photocell responds to the light spectrum near to that of a human eye
- Delay of up to two minutes to prevent false switching due to light from passing vehicles, lightning and more
- Die cast aluminum housing and base, gasketed for weather protection
- Works with screw base CFL
- Cadmium sulphide, epoxy conformal coated 1/2 in diameter, 1 in cell
- Remain closed between dusk and dawn (the unit fails in the on position) contacts
- Three color coded, minimum 6 in wire leads, 16 AWG, rated for 105 deg C lead wires
- Cadmium sulphide
UL Listed|cULus Listed|UL 773A|CSA Certified|ANSI Specified
5 Years