C-H 50MCSR4313M WLL MTD SWT CAP BANK 480V 50KVAR
Factory Availability
C-H 50MCSR4313M WLL MTD SWT CAP BANK 480V 50KVAR
Factory Availability
Stanion #50MCSR4313MCH
MFG #50MCSR4313M
UPC #786685198422
Product Overview
The AutoVAR 300 is an automatically switched, wall-mounted Power Factor Correction capable device designed for low voltage applications in installations requiring precise maintenance of target power factor in a very small footprint.
- Attributes
- Documents
- Application
- Includes
- Item Features
- Standards
BrandEATON
Amperage Rating60 A
ColorGray
Connection TypeRugged Power Distribution Block
ControlInterlock Door
CoolingExhaust Fan
Country of OriginUS
Dimensions13.66 in L x 36 in W x 60 in H
Enclosure TypeNEMA 1
Environmental Conditions-20 to 46 deg C Operating, -40 to 55 deg C Storage
Frequency Rating60 Hz
Indicator TypeCleared Fuse Indicating Neon Light
Manufacturer NameEaton
Material12 ga Steel
Mounting TypeWall
Power Rating50 kVA
SeriesAUTOVAR 300
Switch TypeOn/Off
Type3-Phase 3-Contactor Low Voltage Standard Duty Round
Voltage Rating480 VAC
For automatically regulate power factor where floor space is limited, expansion of the facilities electrical load is not expected and low voltage applications
Dust Filtering
- Wall mount design is ideal for minimum space requirements
- Programmable to automatically add/subtract capacitor stages to maintain preset target power factor
- Power line interconnect
- Control wiring UL type MTW/AWM, CSA TEW 105 deg C copper wire is standard
- Blade type fuses mounted on insulator stand-offs with cleared fuse indicating lights
- Cleared fuse neon indicating lights for each phase and stage located on the door
- Door interlock automatically disengages capacitors, power continues to be provided to the unit until the disconnect is open
- Exhaust fan provides ventilation
- Ground fault interruption provides protection in case of accidental contact with control power and ground
- Built-in thermal sensing, alarming and protection feature allows the unit to operate in optimal temperature while alerting the user of ambient temperature exceeding the nominal operating range
UL 810 Recognized|UL 508A|CSA C22.2 No. 190