SQD 2601AG2 DRUM SWITCH 600VAC 2HP A +OPTIONS
SQD 2601AG2 DRUM SWITCH 600VAC 2HP A +OPTIONS
Stanion #2601AG2SQD
MFG #2601AG2
UPC #785901555414
Prop 65
Product Overview
Square D™ Drum Switch, Type AG, Series: 2601, 600 VAC/250 VDC, 2 hp, 1/4 hp, 1-1/2 hp, 2 hp at 200/230/460/575VAC, 1/4 hp at 115/230 VDC, 1-1/2 hp at 115 VAC Contact, 3 Pole, Reversing, Handle, NEMA 1 Enclosure, Flush,
- Attributes
- Documents
- Application
- Item Features
- Standards
BrandSquare D™
ActionReversing
ActuatorHandle
Contact Rating2 hp at 200/230/460/575VAC, 1/4 hp at 115/230 VDC, 1-1/2 hp at 115 VAC
Country of OriginMX
EnclosureNEMA 1
Manufacturer NameSchneider Electric
MountingFlush
Number of Poles3
Power Rating2 hp, 1/4 hp, 1-1/2 hp
Series2601
TypeType AG
Voltage Rating600 VAC/250 VDC
For designed to start and reverse motors by connecting them directly across-the-line in manual reversing control applications such as machine tools and woodworking machines and similar types of equipment applications
- Screw clamp terminal connections
- Reversing drum switches are designed to start and reverse motors by connecting them directly across the line
- The devices may be used with squirrel cage motors, one phase motors designed for reversing service and series, shunt and compound DC motors
- The applications should be such that across-the-line starting of the motors is not objectionable, unless other means is provided for limiting starting current and torque
- Class 2601 drum switches are field convertible from maintained to momentary operation
- Large movable contact segments are rigidly attached to the main operating shaft
- They are fully insulated from each other and from the shaft
- Stationary contact fingers are mounted in polymeric blocks
- Both movable and stationary contacts are plated for maximum life
- Extremely accessible terminals are provided for easy wiring, contacts are not replaceable
- Type a is provided with screw type terminals and type B is provided with pressure wire connector terminals
- The operating mechanism is assembled for maintained position operation, that is when the handle is moved to the forward or reverse position, it will remain there until moved
- The mechanism can be easily converted, with no additional parts needed, to provide spring return to off operation
- This conversion is accomplished by removing the handle screw and handle, turning the shaft 180 deg and then replacing the handle and handle screw
- Both the nema type 1 and NEMA type 4 devices offer as standard a 1 piece die cast handle
- The polymeric NEMA type 1 enclosure is suitable for indoor applications when normal atmospheric conditions prevail
- The nema type 4 enclosure is suitable for applications requiring watertight and dust tight capabilities
- Two knockouts or openings for 1/2 in conduit entries are located in the bottom plate of the AG/BG types, while two 1/2 in conduit entries with hubs are provided as standard in AW/BW types
- A single captive screw holds the cover on NEMA type 1 enclosures, while three captive screws hold the cover on NEMA type 4 enclosures
UL Listed|CSA Certified|PROP65: This product can expose you to chemicals including: Antimony oxide and Antimony trioxide, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov