KIDDE 900-0113-02 AC/DC PLUG-IN - MULTI-HAZARD -
KIDDE 900-0113-02 AC/DC PLUG-IN - MULTI-HAZARD -
Stanion #900011302KID
MFG #900-0113-02
UPC #784908011305
Product Overview
The Kidde® 900-0113 (model KN-COEG-3) is a 120 VAC powered, plug-in carbon monoxide, propane and natural gas alarm with battery backup and a digital display. The 900-0113 is an easy to install unit that provides reliable protection against the dangers of carbon monoxide. The gas sensor is a metal oxide sensor designed to detect natural gas (methane) or propane. The 900-0113 will detect and store measured data of concentrated CO levels as low as 11 and up to 999 ppm with its peak level memory display and will also display gas if it has detected natural gas or propane. This alarm gives you several mounting options, including direct plug, a 6 ft power cord or table top.
- Attributes
- Documents
- Includes
- Item Features
- Standards
- Warranty
BrandKidde®
Audible Alert85 dB
Country of OriginCN
Detection Range10 ft
Dimensions6.1 in L x 3.8 in W x 1.8 in H
Display TypeLED
Humidity Rating10 to 95 %
Manufacturer NameKidde
Operating Temperature40 to 100 deg F
Power Source9 VDC Battery
Sensor TypeElectrochemical
TypeCarbon Monoxide/Gas Plug-In
Voltage Rating120 VAC
9 VDC Battery
- Protects you and your family from two deadly threats carbon monoxide and explosive gas
- Digital display shows carbon monoxide level in ppm and detects gas
- No buttons to push! continuous digital readout gives you peace of mind at a glance
- Peak level memory displays the highest carbon monoxide concentration measured since the last reset
- Test reset button tests the unit for proper operation and resets the alarm
- AC plug-in operated, easy to install just plug into an AC wall outlet
- Battery backup provides continuous protection in case of a power failure
- By pressing the peak level button you can see the peak carbon monoxide level recorded by the alarm since it was last reset or unplugged
- The continuous digital display shows you the level of carbon monoxide (if any) the unit is sensing as well as if gas is present
- The gas sensor is a metal oxide sensor designed to detect natural gas (methane) or propane
- The alarm shall include an attached plug that can be installed in any outlet following the UL/NPFA/manufacturer recommended guidelines
- The unit shall incorporate a digital display that meets the sensitivity requirements of UL 2034
- Alarm shall include a test button that will electronically simulate the presence of carbon monoxide or gas and cause the unit to go into alarm
- The alarm shall include a piezoelectric horn that is rated at 85 dB at 10 ft
- http://www.youtube.com/watch?v=D2CCt7ePOi4
CSA Certified|UL 2034
5 years Limited