APPLETON APPEYDM100 SEALING UNILET WITH DRAI
APPLETON APPEYDM100 SEALING UNILET WITH DRAI
Stanion #APPEYDM100APP
MFG #EYDM100
UPC #781381230094
Product Overview
Appleton® UNILETS® Conduit Sealing Fitting, Dust-Ignitionproof Explosionproof Raintight, Series: EYDM, 1 in, For Use With: IMC/Threaded Rigid Metallic Conduit, Malleable Iron, Triple Coated, 4.06 in L x 1.56 in W,
- Attributes
- Documents
- Application
- Item Features
- Standards
BrandAppleton®
ColorSilver
Country of OriginMX
Dimensions4.06 in L x 1.56 in W
FinishTriple Coated
Manufacturer NameEmerson Electric
MaterialMalleable Iron
SeriesEYDM
Size1 in
Suitable For Use WithIMC/Threaded Rigid Metallic Conduit
TypeDust-Ignitionproof Explosionproof Raintight
For prevent passage of gases, vapors or flames from one portion of conduit system to another
- Smooth, rounded integral bushing in each hub to protect conductor insulation
- Accurately tapped, tapered NPT threads for tight, rigid joints and ground continuity
- Removable nipple in male sealing fitting may be used interchangeably in top or bottom hub
- Close radius type for sealing vertical conduit runs
- Restrict any explosion to the sealed off enclosure
- Required in Class I, Division 1 and 2 locations within 18 in of enclosures containing apparatus that may cause arcs, sparks or high temperatures
- Required in Class I, Division 1 and 2 locations where 2 in or larger conduit enters enclosure, fitting housing terminals, splices or taps
- Required in Class I, Division 1 and 2 locations at the boundary where conduit leaves classified location
- Required in Class I, Division 1 and 2 locations where two or more enclosures are connected by 36 in or less conduit, seal must be located within 18 in of either enclosure
- Required where cables which exceed rate of gas or vapor transmission permitted for seals are used in Class I, Division 2 locations
- Tapered MNPT X tapered FNPT connection
- 25% fill vertical conduit drain sealing fittings
- Access cover has drain valve for automatic draining of water accumulation above the seal
- Chromate/epoxy powder coated/zinc electroplated finish
UL 886|UL 1203|UL File No. E10444|CSA C22.2 No. 30|CSA 065181|Class I, Groups B, C, D|Class II, Groups E, F, G|Class III