OZ-G CSME600P SEALING BUSHINGS
Product Overview
O-Z/Gedney conduit sealing bushings are used for sealing the ends of conduit in applications involving higher static gas or fluid pressures than can be handled by standard sealing bushings. They are designed for use with for use with insulated wire, cable and rigid metal conduit. If they are used with IMC/EMT, a short nipple of rigid metal conduit should be used to accommodate the conduit sealing bushings. For SCH 40 PVC conduit.
- Attributes
- Documents
- Application
- Item Features
- Standards
BrandO-Z/Gedney
Conduit Size6 in
Country of OriginUS
Manufacturer NameEmerson Electric
Temperature Rating-40 to 200 deg F
TypeType CSME External Explosionproof
Other
For use with pipe, conduit or tubing, these sealing bushings are used to seal against fluid and gas pressure around mechanical pipes, casing, conduits or tubes, to sealing a pipe within a pipe, some types are specifically designed for use in core bit drilled holes or precast holes in concrete
- The complete assembly is provided with 1 or multiple holes to accommodate the size and number of cables which emerge from the conduit
- When the fitting is in place and the screws are tightened, the neoprene sealing ring is compressed between the metal plates and is forced against the inside wall of the conduit and also against the cable insulation to effect a complete seal at the conduit end
- These fittings are simple to install
- They eliminate the special preparation of the end of the conduit or the compounding of the conduit thread which is required on other types of sealing fittings used to seal against high pressures
- They are capable of sealing against gas or fluid pressure of 50 psig (non-segmented, segmenting reduces the pressure in half)
- Can also be supplied with lay in lug grounding wire connector
- Slotted PVC coated steel discs, neoprene sealing ring and stainless steel socket head cap screws and washers
ARRA Compliant|Buy American Act Compliant|UL File No. E14817|Class I, Division 2 per NEC 501.10(B)(4)