RussellstollĀ®
ABB DS2514MP00K 200A PL G 4P5W MG 514 00K 3PY347V
RussellstollĀ®
ABB DS2514MP00K 200A PL G 4P5W MG 514 00K 3PY347V
Stanion #DS2514MP00KABB
MFG #DS2514MP00K
UPC #708917208372
Product Overview
RussellstollĀ® Max-GardĀ® Male Pin Plug, 3-Phase Waterproof, 347/600Y VAC, 200 A, 60 Hz, 4 Poles, 5 Wires, NEMA 4X/6, Industrial Grade, -40 to 130 deg C, Pressure-Type Solderless Screw Terminal, Cast Aluminum, 13-3/4 in H,
- Attributes
- Documents
- Application
- Item Features
- Standards
BrandRussellstollĀ®
Amperage Rating200 A
Country of OriginUS
Dimensions13-3/4 in H
Frequency Rating60 Hz
GradeIndustrial
Manufacturer NameABB
MaterialCast Aluminum
NEMA RatingNEMA 4X/6
Number of Poles4
Number of Wires5
Temperature Rating-40 to 130 deg C
Terminal TypePressure-Type Solderless Screw
Type3-Phase Waterproof
Voltage Rating347/600Y VAC
For electrical hook-up of mobile medical imaging (MMI trailers)
- With 1-11/16 in bushing, 2-control contacts
- Waterproof construction provides environmental separation at the front of each device (they dont have to be connected together just to be called "watertight")
- Center ground contact
- 24-single rated factory polarizations
- Gated deadfront construction
- Two optional control contacts
- O-rings/environmental separation, full line
- Complete line epoxy powder coated - standard
- All devices upon disconnect under load shall have provision so the arc is contained and extinguished within the insulation cavity, making it impossible to withdraw a live plug
- All devices shall be factory polarized for amperage, voltage, frequency and phase, thus providing a single voltage rating, single interface system
- The grounding of the device shall be accomplished through a separate center ground (earth) make first and break last pole on all devices for complete system grounding
- All devices shall accommodate up to four power pins plus a separate center ground pin and they shall be integral with the connector bodies (five pins total)
- Watertight capability shall be obtained by using a gasketed screw cap
- All devices must have an option for two control contacts, which shall be make last and break first for use in electrical interlocks and/or control circuits
UL Listed|CSA C22.2-182.1 File No. LR14096|OSHA Compliant|MIL-STD-105/1344|ASTM D570/D2565|NEMA PR4-1983|NEC Certified