LEV MDS10-IDI IV LEVLK PIR OC SENS WL SW 180D 1
LEV MDS10-IDI IV LEVLK PIR OC SENS WL SW 180D 1
Stanion #MDS10IDILEV
MFG #MDS10-IDI
UPC #78477544587
Product Overview
Lev-Lok® innovative design streamlines installation and reduces costs. In just two easy steps, the wiring device is securely attached to the wiring module. Place the wiring module over the device's connection pins and twist clockwise to lock. Replacement is just as easy just turn counter clockwise to unlock and remove. The module is keyed so that it cannot be installed incorrectly. This not only saves time during the initial installation, but makes maintenance applications quicker, safer and easier as well.
- Attributes
- Documents
- Application
- Item Features
- Standards
BrandLeviton®
ColorIvory
Control OutputAutomatic On/Manual On
Country of OriginCN
Coverage2100 sq-ft
Dimensions46 in H x 1.75 in W x 2.67 in D
Lamp TypeFluorescent/Incandescent
Manufacturer NameLeviton
Mounting TypeWall
Power Rating100/277 mW
Response Frequency50/60 Hz
Sensor TypePIR
Temperature Rating0 to 50 deg C
Time Delay30 s to 30 min
Type1-Pole Low-Profile Photocell Controlled Single Relay
Viewing Angle180 deg
Voltage Rating120/230/277 VAC
Small Office, Conference Rooms, Lounges, Classrooms and Commercial Applications
- Fits in standard wallbox and replaces 1-pole wall switch, gangable with other units
- Low profile design eliminates obtrusive scanning device look
- Elegant Decora® wallplates compliment any interior for sleek aesthetics, uses Decora® wallplates and coordinates with Leviton® popular line of Decora® wiring devices
- 180 deg field of view provides approximately 2100 sq-ft of coverage
- Convenient pushbutton provides manual ON/OFF light switching at any time
- Two dual element PIR sensors used to widen detection range
- Segmented fresnel lens provides optimum sensitivity and performance
- Designed with an extensive ''minor motion'' area where even slight body movements will be detected
- Vandal resistant PIR lens
- Lev-Lok® makes installation and replacement simple with latch and lock system which streamlines installation and reduces costs
- The Lev-Lok® wiring module is keyed so that it cannot be installed incorrectly, saving time during installation and making maintenance quicker, safer and easier
- Horizontal field-of-view may be adjusted between 180 and 60 deg of arc by using integral blinders located on either side of the lens, no masking tape required
- Manual ON/auto OFF mode for installations where manual ON switching is required but auto OFF switching is still desired for CEC title 24 energy savings
- Red LED indicator light flashes when sensor detects motion to verify detection is active
- Time delay adjustment for delayed OFF time settings of 30 sec (for walking test), 10, 20 and 30 min, allows customized adjustments to maximum energy savings
- Light sensor adjustable ambient light override ranges from approximately 20 to 5000+ LUX to prevent lights from turning ON automatically during periods of ample natural light, increasing energy savings
- Light sensor enables the load hold OFF feature once level has been set
- Vacancy confirmation when the time out expires and the lights turns OFF, a 30 sec vacancy confirmation exists to turn the lights back ON
- False detection circuitry
- Presentation mode feature for slide or film presentations allows pushbuttons to turn lights OFF and keep them OFF while the room is occupied
UL/cUL Listed|CEC Title 24 Compliant|FCC Approve|NOM Certified